The FOLIANT Gulliver C 520Sis a semiautomatic industrial laminating machine (Laminator + Separator) equipped with a pneumatic system of laminating rollers pressure with an easy thrust control. A small compressor is integrated inside the machine frame. The machine has been designed with an operating width of 520 mm and it represents an ideal choice for professional single side lamination in small and medium sized printing shops. Maximum speed is up to 15 meters/min.

 

Laminator

The FOLIANT Gulliver C 520S laminator maximum sheet size is 52 x 74 cm. The minimum sheet size is 30 x 25 cm (A4). Manual feeding is easy due to an input front conveyor.

The roll of a film is mounted on an easy handle shaft with a film tension control breaker. The shaft capacity is up to 3000 m of the 24 - 31 microns film. The film holder unit is equipped with a trim slitter and a perforating wheel.The laminating process is done between two laminating rollers - a highly polished chrome roller, and a lower hard rubber pressure roller. The laminating roller is heated with an infra-red heating spiral, with a sensitive contact temperature sensor. The pressure is pneumatically adjustable to achieve an extra high pressure between the laminating rollers. A small compressor is integrated inside the machine frame. 

The laminating unit is equipped with an adjustable decurl unit with a blade for offset printed sheets decurling. It can be optionally extended with a decurl roller, see options.

The FOLIANT Gulliver C 520S is a semiautomatic machine. The feeding is manual. The laminating unit is equipped with a synchronized feeding conveyor and an adjustable side guider for an easy manual loading.

 Separator

F-Gulliver-C-520SThe belt separator (sheeter) is equipped with a separating roller. The process is controlled with an extra speed control knob and a deflection wheel angle. The separated sheets are delivered into a reception unit or a vibrating jogger (options).

 Laminating Films

The machine laminates the BOPP films (23 – 42 microns) and Nylon films (max. 35 microns).

 Opcionais: 

  • Reception Unit RU530 

It is a simple adjustable reception unit for stocking the laminated sheets. 

  • Jogger 530 (optional)* 

It is an adjustable vibrating reception unit for the laminated sheets stocking. Its capacity is limited up to a 10 cm pile of sheets. 

  • Film Supply Roll Shaft (optional) 

Extra Film Supply Roll Shaft for quicker film replacement. 

  • Decurl Roller (optional) 

Decurl roller is an additional roller placed on a decurl bar for digital printed sheets decurling (to prevent scratches on sheets printed on both sides by digital print with sensitive inks). The maximum width of laminated sheets is limited to 49x74cm.

*Important – the machine must be operated either with a RU530 or with a Jogger 530.

 

Jogger 530 
RU 530 
Jogger 530 RU530

  

Principais Caracteristicas:

Máxima Velocidade

15 m / min

Alimentação

Manual

Separação (saída)

Automática

Gramatura

115 - 350 g/m2

Sistemas de pressão dos Rolos

Pneumático

Compressor integrado

Incluso

Min. entrada de papel

30 x 25 cm

Max. entrada de papel

52 x 74 cm

Max. Performance

1300 B2 / h

Temperature Control

80 - 140°C

Tempo de aquecimento

5 min

Tensão de Energia 

230 V AC, 50-60 Hz

Potência

2500 W

Ocupação de piso (w x l)

100 x 250 cm

Peso

270 kg

Bandeja de Recepção Vibratória Jogger 530

Opcional

Bandeja de Recepção RU530

Opcional

Eliminador de curvatura do papel

Opcional

0
0
0
s2sdefault

Quer mais informações?

 


Ligue para Diginove e tire suas dúvidas